BONUS! Wiha 132802 80 Piece Insulated Rolling Tool Case + Free Knipex Pliers

BONUS! Wiha 132802 80 Piece Insulated Rolling Tool Case + Free Knipex Pliers - KC Tool
NOTE: The product title and description supersedes the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.

List Price: $2,049.78
$1,742.31
(1 review) Write a Review
SKU:
132802
Availability:
1
Stock Status:
item in stock In Stock
Wiha 32800 Set + Includes Free Pair of Knipex 13 88 8 Pliers for Electrical Installation - Insulated $102.48 value

80 Piece Insulated Rolling Tool Case Set includes:
Long Nose Pliers:6.3, 8.0"
Bent Nose Pliers:6.3"
Long Flat Nose Pliers:6.3"
Combo Pliers / Crimpers:9.0"
Diagonal Cutters:6.3"
High Leverage Cutters:8.0"
Cable Cutters:6.3"
Stripping Pliers:6.3"
Adjustable Wrench:8.0"
Inch Insulated Sockets:1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8"
Metric Insulated Sockets:13.0, 14.0, 15.0, 17.0, 19.0, 20.0, 22.0mm
Inch Insulated Nutdrivers:7/32, 1/4, 5/16, 3/8, 7/16"
Metric Insulated Nut Drivers:5.0, 5.5, 6.0, 7.0, 8.0, 10.0, 13.0mm
Insulated Cable Knife:50mm
2 Meter RulerInch / Metric
Insulated Ratchet3/8" Drive
Insulated Extension Bar3/8 x 4.9"
Single Pole Voltage Detector
Insulated Slotted Drivers:2.5, 3.0, 3.5, 4.0, 4.5, 5.5, 6.0, 6.5, 8.0, 10.0mm
Insulated Phillips Drivers:#0, #1, #2, #3
Insulated Slt/Ph Terminal Drivers:#1, #2
Insulated Square Drivers:#1, #2
Insulated Torx Drivers:T6, T7, T8, T9, T10, T15, T20, T25, T30
Insulated Inch T-handles:5/32, 3/16, 7/32, 1/4, 5/16, 3/8"
Insulated Metric T-handles:4.0, 5.0, 6.0, 8.0mm
Insulated L-Key:10mm, 1/2"

10,000 Volt tested
1,000 Volt rated

Specifications & Standards:
EN/IEC 60900
ASTM F-1505-01
VDE 0682/part 201
DIN 7437
NFPA70E & CSA

Insulated tools are intended to provide protection against accidental contact with charged energized circuits. For maximum safety we recommend de-energizing all circuits whenever possible before starting work on electrical apparatus or conductors. Always visually inspect insulation on tools before use, do not use tools if insulation shows signs of wear or damage to the insulated areas of the tool. Wear appropriate eye protection when using hand tools. Use insulated protective outer wear when appropriate.

Wiha Tools No Hassle Guarantee

Wiha branded tools are regarded as the most durable, best designed and highly innovative products around. Our tools are used by demanding professional tradespeople and tool aficionados alike. They are meant to be used and utilized often. However, if you are not happy for any reason return them within 12 months of purchase with proof of purchase and we will Repair or Replace.

Rest assured, if for some reason there is a defect in material or workmanship we will replace your tool free of charge for as long as you own the tool.

Failures due to misuse, abuse or normal wear and tear are not covered by this guarantee. We stand by our products with what we believe is the best No Hassle Guarantee in the industry.

Exclusions
Wiha Tools has the right to exclude bits, Tweezers and Ceramic Screwdrivers. These products are either consumable or wear easily. All torque tools are designed to be re-calibrated after 5,000 cycles or 1 year (whichever comes first).

Legal
Some areas do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This guarantee gives you specific rights, and you may also have other rights, which vary, from state to state, province to province, or country to country.

This No Hassle Guarantee is the sole and exclusive guarantee for the Willi Hahn Corporation dba Wiha Tools. No employee, agent, dealer, or other person is authorized to alter this guarantee or make any other guarantees on behalf of Wiha Tools.

Willi Hahn Corporation
Attn: No Hassle Guarantee
1348 Dundar Cir, Monticello, MN 55362
800-494-6104
Tipstyle:
Phillips
Tipstyle:
Slotted
Tipstyle:
Hex
Tipstyle:
Torx
Tipstyle:
Square
Tipstyle:
Nut Driver
Tipsize:
Phillips #0
Tipsize:
Phillips #1
Tipsize:
Phillips #2
Tipsize:
Phillips #3
Tipsize:
Square #1
Tipsize:
Square #2
Tipsize:
Torx T6
Tipsize:
Torx T7
Tipsize:
Torx T8
Tipsize:
Torx T9
Tipsize:
Torx T10
Tipsize:
Torx T15
Tipsize:
Torx T20
Tipsize:
Torx T25
Tipsize:
Torx T30
Metricsize:
13 mm
Tipsize:
Nut Driver Metric 13 mm
Metricsize:
14 mm
Metricsize:
15 mm
Metricsize:
17 mm
Metricsize:
19 mm
Metricsize:
20 mm
Metricsize:
22 mm
Tipsize:
Nut Driver SAE 7/32 inch
Tipsize:
Nut Driver SAE 1/4 inch
Tipsize:
Nut Driver SAE 5/16 inch
Tipsize:
Nut Driver SAE 3/8 inch
Tipsize:
Nut Driver SAE 7/16 inch
Inchsize:
1/2 Inch
Inchsize:
9/16 Inch
Inchsize:
5/8 Inch
Inchsize:
11/16 Inch
Inchsize:
3/4 Inch
Inchsize:
13/16 Inch
Inchsize:
7/8 Inch
Features:
Insulated 1,000 V
Indieset:
Tool Sets
Metricsize:
4.0 mm
Tipsize:
Nut Driver Metric 5.0 mm
Tipsize:
Nut Driver Metric 5.5 mm
Tipsize:
Nut Driver Metric 6.0 mm
Tipsize:
Nut Driver Metric 7.0 mm
Tipsize:
Nut Driver Metric 8.0 mm
Tipsize:
Nut Driver Metric 10 mm
Ratchetdrivesize:
3/8 Inch Square Drive
Tipsize:
Slotted 2.5 mm (3/32 in.)
Tipsize:
Slotted 3.0 mm (1/8 in.)
Tipsize:
Slotted 3.5 mm (9/64 in.)
Tipsize:
Slotted 4.0 mm (5/32 in.)
Tipsize:
Slotted 4.5 mm
Tipsize:
Slotted 5.5 mm
Tipsize:
Slotted 6.0 mm
Tipsize:
Slotted 6.5 mm
Tipsize:
Slotted 8.0 mm
Tipsize:
Slotted 10 mm
Tipsize:
Xeno/Terminal #1
Tipsize:
Xeno/Terminal #2
Tipsize:
Hex Metric 4.0 mm
Tipsize:
Hex Metric 5.0 mm
Tipsize:
Hex Metric 6.0 mm
Tipsize:
Hex Metric 8.0 mm
Tipsize:
Hex SAE 5/32 inch
Tipsize:
Hex SAE 3/16 inch
Tipsize:
Hex SAE 7/32 inch
Tipsize:
Hex SAE 1/4 inch
Tipsize:
Hex SAE 5/16 inch
Tipsize:
Hex SAE 3/8 inch
Country of Origin:
Made in Germany

1 Review Hide Reviews Show Reviews

  • 4
    Very nice set

    Posted by Kenneth Whipple on Aug 1st 2016

    Received very quick and good quality