Gedore S 1500 ES-01 Module assortment small, 104 pcs

Gedore S 1500 ES-01 Module assortment small, 104 pcs - KC Tool
NOTE: The product title and description supersede the image shown. The picture provided by the manufacturer is not always exact. We may use the same image for multiple sizes of an item.

Gedore

List Price: $2,561.91
$1,742.10
(No reviews yet) Write a Review
Stock Status:
Gedore may not be backordered at this time.

Out of stock

SKU:
GR2319845
Availability:
0imported on order
Out of stock Gedore products may not be backordered at this time due to supply chain issues.
Gedore S 1500 ES-01 Module assortment small, 104 pieces
Combination wrenches: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
Hex allen L-key: 2mm (5/64"), 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
1/2" square drive sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 23mm, 24mm, 26mm, 27mm, 28mm, 30mm, 32mm
Hex bit 1/2" square drive sockets: 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 14mm
1/2" square drive reversible ratchet
1/2" square drive sliding T-bar: 292mm (11.5")
1/2" square drive universal joint
1/2" square drive extension: 125mm (5")
1/2" square drive extension: 250mm (10")
Hex bit 3/8" drive sockets: 3mm, 4mm, 5mm, 6mm, 8mm
External Torx 3/8" drive sockets: E4, E5, E6, E7, E8, E10
Torx bit 3/8" drive sockets: T8, T9, T10, T15, T20, T25, T27, T30, T40
3/8" square drive sliding T-bar: 115mm (4.5")
3/8" square drive extension: 97mm (4")
3/8" square drive universal joint
3/8" square drive driving handle
3/8" square drive reversible ratchet
260mm / 10.2" Universal pliers, push-button adjustment with 15 settings
160mm / 6.3" Telephone pliers with side cutting edge, serrated, straight pattern
180mm / 7.1" Power combination pliers
160mm / 6.3" Power side cutters, American pattern
Flat cold chisel, octogonal: 24mm x 250mm
Cross-cut chisel, octogonal: 10mm x 125mm
Drift punch, octogonal: 5mm x 120mm
Center punch: 5mm x 120mm
Pin punch: 3mm x 150mm
Pin punch: 4mm x 150mm
Engineer's hammer with hickory handle: 300g x 300mm
Slotted screwdriver: 4mm x 100mm
Slotted screwdriver: 5.5mm x 100mm
Slotted screwdriver: 6.5mm x 150mm
Slotted screwdriver: 8mm x 150mm
Phillips screwdriver: #1 x 80mm
Phillips screwdriver: #2 x 100mm
General basic range for beginners in all professions
Tools in metric sizes
Proved GEDORE ES tool modules from ABS
For tool trolleys 1578, 1580, 1585, 2000, 2525-520, 2535, 3010, 3000 TANTO, 2005 models 0511, 0701, 0810, 2004 models 0321, 0511, 0620, 0701, 0810, 1000 and workbench 1506 XL models 2511 and 2810
Gedore Warranty (Abridged)
  1. GEDORE warrants to Customers who purchase a Product from the GEDORE catalogue, website or an authorized GEDORE dealer for use in their profession that the Product will be free from defects in workmanship and materials. GEDORE brand torque control tools are warranted for twelve (12) months from date of purchase and up to 5,000 torque cycles (whereafter GEDORE recommends re-calibration). Consumable Products are warranted only against defects in workmanship or materials that prevent their use. For purposes of this Warranty, Consumable Products are defined as those Products which are reasonably expected to be used up or damaged during use, including without limitation drill bits, saw and knife blades, grinding and sanding discs, knife blades, files, sensors and batteries. This Warranty extends only to the original Customer and may not be transferred or assigned to any third party.

  2. GEDORE, at its option, will repair or replace Products due to defects in workmanship or materials, or provide a refund by repaying or crediting Customer with an amount equal to the purchase price of such Products. The repair, replacement or refund of the Products shall be at the election and expense of GEDORE, and shall be Customer's sole and exclusive remedy, in lieu of any and all other rights and remedies which Customer may otherwise have. To obtain Warranty service, Customer shall follow the Return of Product procedures set forth in Paragraph 6 below. GEDORE is not responsible for Products which are lost or damaged during return. It is recommended that Customer: (1) send the returned Product with a tracking or delivery confirmation number; (2) use a carrier offering shipment tracking for all returns; and (3) either insure the Product during shipment or declare the full value of the shipment so that Customer is protected if the Product is lost or damaged during shipment. GEDORE is not liable for the repair, replacement or refund of a Product without valid proof of purchase or delivery.

  3. The Warranty described above applies only when the Product has been subject to normal use, and does not cover defects or failures resulting from abnormal use, unreasonable use, misuse, abuse, accident, alteration, modification, neglect, lack of maintenance, use after the Product is significantly worn, or when repairs to the Product have been made or attempted by persons other than GEDORE (collectively, 'Abuse'). By repairing, replacing or providing a refund on a Product, GEDORE does not waive a claim that a Product was subject to Abuse.
Indieset:
Tool Sets
Tipstyle:
Phillips
Tipstyle:
Slotted
Tipstyle:
Hex
Tipstyle:
Torx
Tipstyle:
External Torx
Tipsize:
Phillips #1
Tipsize:
Phillips #2
Tipsize:
Slotted 4.0 mm (5/32 in.)
Tipsize:
Slotted 5.5 mm
Tipsize:
Slotted 6.5 mm
Tipsize:
Slotted 8.0 mm
Tipsize:
Hex Metric 2.0 mm
Tipsize:
Hex Metric 2.5 mm
Tipsize:
Hex Metric 3.0 mm
Tipsize:
Hex Metric 4.0 mm
Tipsize:
Hex Metric 5.0 mm
Tipsize:
Hex Metric 6.0 mm
Tipsize:
Hex Metric 8.0 mm
Tipsize:
Hex Metric 10 mm
Tipsize:
Torx T8
Tipsize:
Torx T9
Tipsize:
Torx T10
Tipsize:
Torx T15
Tipsize:
Torx T20
Tipsize:
Torx T25
Tipsize:
Torx T27
Tipsize:
Torx T30
Tipsize:
Torx T40
Tipsize:
External Torx E4
Tipsize:
External Torx E5
Tipsize:
External Torx E6
Tipsize:
External Torx E7
Tipsize:
External Torx E8
Tipsize:
External Torx E10
Metricsize:
4.0 mm
Metricsize:
5.0 mm
Metricsize:
5.5 mm
Metricsize:
6.0 mm
Metricsize:
7.0 mm
Metricsize:
8.0 mm
Metricsize:
9.0 mm
Metricsize:
10 mm
Metricsize:
11 mm
Metricsize:
12 mm
Metricsize:
13 mm
Metricsize:
14 mm
Metricsize:
15 mm
Metricsize:
16 mm
Metricsize:
17 mm
Metricsize:
18 mm
Metricsize:
19 mm
Metricsize:
20 mm
Metricsize:
21 mm
Metricsize:
22 mm
Metricsize:
23 mm
Metricsize:
24 mm
Metricsize:
26 mm
Metricsize:
27 mm
Metricsize:
28 mm
Metricsize:
30 mm
Metricsize:
32 mm
Punchdiameter:
3mm Punch
Punchdiameter:
4mm Punch
Punchdiameter:
5mm Punch
Ratchetdrivesize:
1/4 Inch Square Drive
Ratchetdrivesize:
1/2 Inch Square Drive
Country of Origin:
Made in the European Union
Stockstatus:
Out of Stock
UPC/EAN:
4010886895801
!