Long Nose Pliers: 6.3, 8.0" Bent Nose Pliers: 6.3" Long Flat Nose Pliers: 6.3" Combo Pliers / Crimpers: 9.0" Diagonal Cutters: 6.3" High Leverage Cutters: 8.0" Cable Cutters: 6.3" Stripping Pliers: 6.3" Adjustable Wrench: 8.0" Inch Insulated Sockets: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8" Metric Insulated Sockets: 13.0, 14.0, 15.0, 17.0, 19.0, 20.0, 22.0mm Inch Insulated Nutdrivers: 7/32, 1/4, 5/16, 3/8, 7/16" Metric Insulated Nut Drivers: 5.0, 5.5, 6.0, 7.0, 8.0, 10.0, 13.0mm Insulated Cable Knife: 50mm 2 Meter Ruler Inch / Metric Insulated Ratchet 3/8" Drive Insulated Extension Bar 3/8 x 4.9" Single Pole Voltage Detector Insulated Slotted Drivers: 2.5, 3.0, 3.5, 4.0, 4.5, 5.5, 6.0, 6.5, 8.0, 10.0mm Insulated Phillips Drivers: #0, #1, #2, #3 Insulated Slt/Ph Terminal Drivers: #1, #2 Insulated Square Drivers: #1, #2 Insulated Torx Drivers: T6, T7, T8, T9, T10, T15, T20, T25, T30 Insulated Inch T-handles: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8" Insulated Metric T-handles: 4.0, 5.0, 6.0, 8.0mm Insulated L-Key: 10mm, 1/2"
Neatly organized inside of a lockable water tight rolling tool case.
Includes a large Wiha tool bag with 22 pockets and shoulder strap.
10,000 Volt tested, 1,000 Volt rated
Specifications & Standards:
VDE 0682/part 201
NFPA70E & CSA
Insulated tools are intended to provide protection against accidental contact with charged energized circuits. For maximum safety we recommend de-energizing all circuits whenever possible before starting work on electrical apparatus or conductors. Always visually inspect insulation on tools before use, do not use tools if insulation shows signs of wear or damage to the insulated areas of the tool. Wear appropriate eye protection when using hand tools. Use insulated protective outer wear when appropriate.
Case Measurements: 22" L x 13.75" W x 9" H
Wiha Tools No Hassle GuaranteeWiha branded tools are regarded as the most durable, best designed and highly innovative products around. Our tools are used by demanding professional tradespeople and tool aficionados alike. They are meant to be used and utilized often. However, if you are not happy for any reason return them within 12 months of purchase with proof of purchase and we will Repair or Replace.
Rest assured, if for some reason there is a defect in material or workmanship we will replace your tool free of charge for as long as you own the tool.
Failures due to misuse, abuse or normal wear and tear are not covered by this guarantee. We stand by our products with what we believe is the best No Hassle Guarantee in the industry.
Wiha Tools has the right to exclude bits, Tweezers and Ceramic Screwdrivers. These products are either consumable or wear easily. All torque tools are designed to be re-calibrated after 5,000 cycles or 1 year (whichever comes first).
Some areas do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This guarantee gives you specific rights, and you may also have other rights, which vary, from state to state, province to province, or country to country.
This No Hassle Guarantee is the sole and exclusive guarantee for the Willi Hahn Corporation dba Wiha Tools. No employee, agent, dealer, or other person is authorized to alter this guarantee or make any other guarantees on behalf of Wiha Tools.